# About

is a graduate engineer and have  experience working in mechanical engineering field. Apart from maintaining this blog, he also help(paid) people  solving their engineering design related problems.

He holds a diploma in CAD/CAM/CAE and perusing master in computer applications . He worked extensively in earth moving equipment ,heavy machinery and construction  industry.

He started writing for different websites from 2008 and regularly contributing for engineering and technology domains.

Off let, he has developed a bad habit of poking into coding and trying to perfect himself in android and web development technologies. His android app for compression spring design is getting quite a response in the Amazon market place.  He is now keeping himself  busy developing a Joomla template suitable for email based study help providers.

## 16 thoughts on “About”

1. Kiran_amt2011 says:

Can explain me how to draw acceleration diagram for mechanism

2. Back Broad says:

I was surprised to learn the same about your blog—  I loved it. I am a big fan of your blog. i am so excited by read of your blog’s content. really great post. Thanks for sharing.

3. rey says:

what time stress relieving is conducted on a weld joint?

4. MechGuru says:

depending upon the technique, stress reliving can be done before, during after the welding is done.

5. MechGuru says:
6. Ronnie says:

I am designing a heat exchange for a solar water heating system, where i have to use the energy received by the collector and covert it into hot water, however i am struggling to form calculations that can help me do this. I need inlet temperature from the solar concentrator, inlet of cold water, outlet of the energy being lost by once the heat energy has entered the heat exchanger and a final outlet temperature of the hot water. How can i calculate this?

7. Ronnie says:

I am designing a heat exchange for a solar water heating system, where i have to use the energy received by the collector and covert it into hot water, however i am struggling to form calculations that can help me do this. I need inlet temperature from the solar concentrator, inlet of cold water, outlet of the energy being lost by once the heat energy has entered the heat exchanger and a final outlet temperature of the hot water. How can i calculate this?

8. ab says:

Hi Shibashis, I am designing Combined loading cylindrical pressure vessel. what method would you recommend to calculate the bottom thickness of the vessel head. Thanks

9. MechGuru says:

What do you mean by combined loading?

10. Fahmi says:

Hi,

can you please repair the broken link part 7 for thin wall pressure vessel design?

i really appreciate your help on this matter.

11. peggy says:

Cycloidal form gear tooth stronger than Involute?

12. Eng.Ehab ibrahim says:

thanx for your great work on this site

13. Eng.Ehab ibrahim says:

thanx for your great work on this site

14. jolly dps says:

i want suitable close loop pump & matching with drive motor with parking brake system to run the trolley on the steel ramp with 4 no of solid cushin tyres with the speed of 15 to 20 km /hr . graident is 4 to 7 degree max and loiad is 6.5 ton cap

15. munaf says:

Hi, i would like to understand the design of axle shaft bolts. we have driveline torque (engine torque x first gear gear x rear axle ratio) and then we have slip toque(tire radius x co efficient of friction x rear axle weight). Pls enlighten me which one to consider fort the design of the joints for axle shaft flange.