Involute gear vs. Cycloidal gear

What is involute gear?
All the gear teeth have top flat portion and two side curves. The side curves for the involute gears are in the form of involute curve of a circle.
Involute curve of a circle can be generated by the locus of an end point of an imaginary taut string unwounding from the circle.

What is cycloidal gear?
Cycloid is a curve generated by locus of any point on a circle which is rolling around another circle. If the second circle rolls outside the first circle then the generated curve is called epicycloid and if it rolls inside the first circle then the generated curve will be hypocycloid. The gear whose teeth profile is made up of cycloidal curves is called cycloidal gear. Each tooth profile will be combination of epicycloid and hypocycloid curves.

Advantage of Involute gear
• Contacts between two mating teeth in involute gear occur in a fixed plane of action irrespective of the centre to centre distances between the gears. Hence, Involute gears can handle centre sifts of the gears better. This provides assembly flexibility.
• Involute gear produces lesser noise than cycloidal gears.
• Manufacturing of accurate involute gear teeth is easy.

Advantage of cycloidal gear
• Cycloid teeth does not undercut or interfere with its mating teeth.
• Lesser number of teeth can be possible for cycloidal gears which facilities large reduction ratios.
• Cycloidal teeth are stronger than involute teeth.

Identification of involute and cycloidal gears
Curve portion of involute teeth is made up of a single curve where as the profile of a cycloidal tooth is made up of two different curves (epicycloid and hypocycloid). If the teeth attached sharply with the base circle then it should be an involute gear or else it may be a cycloidal gear.

Examples
Involute gear can be seen almost every where, car gear box, ships, robotics application, home appliances, machine tools.

Cycloidal teeth are found mainly in clock and watches.

Further readings

About 

5 thoughts on “Involute gear vs. Cycloidal gear

  1. Cycloidal teeth are stronger than involute teeth? I’m not an engineer but have seen the opposite quoted in several places elsewhere on-line.

  2. yess cycloidal are stronger but complex.They are strong because their holding with the base circle plate is more(more width)compared to involute gears.

Leave a Reply

Your email address will not be published. Required fields are marked *